DHBT60-13-118 Configuration
The separate 180 m height and 700 m horizontal references identify the baseline route class in the diesel table.
DHBT60-13-118 delivers a published theoretical 60 m³/h at up to 12.5 MPa. This is the lower-engine-power diesel configuration in the current DHBT60 comparison.

Series rendering. Confirm DHBT60-13-118's appearance and included equipment in its proposal.
DHBT60-13-118 is a trailer concrete pump using a published 118 kW diesel engine reference. It receives already mixed concrete in its hopper and transfers it through a separately planned line. It does not mix the concrete.
Assess the 60 m³/h theoretical delivery class for projects with a defined external concrete source and a route suited to the listed 12.5 MPa reference configuration.
The separate 180 m height and 700 m horizontal references identify the baseline route class in the diesel table.
A 5,500 kg listed weight is below the higher-pressure DHBT60-16-145 reference.
Understand the role of each connection before building the equipment package.
INTERFACE 01 / Stationary Concrete Batching PlantA stationary plant can provide concrete to a receiving fleet that supplies the pump at the project.
Balance actual concrete arrivals with pump operation; a plant rating is not the pump inlet supply rate.
INTERFACE 02 / Mobile Concrete Batching PlantA mobile batching arrangement is an option when concrete is produced within or near the project site.
Agree the physical discharge/transfer interface rather than assuming every plant can discharge directly into the pump.
INTERFACE 03 / Spider BoomA separate placing boom performs distribution, while DHBT60 provides the pumping duty.
Include the full delivery route and placing-boom pipework in the combined pressure and support assessment.
INTERFACE 04 / Concrete Boom PumpA truck-mounted boom pump is another equipment architecture where access and supports permit.
Compare the complete placing method; it is not a default second pump to connect downstream of the DHBT60.
Options and alternative architectures are identified in each explanation. This is not a pre-approved matched package. Final connections, duty and supplied components require a model-specific technical review.
Review My Equipment CombinationSeparate the key systems to see what each contributes to the operation.
DHBT60-13-118 functional separation illustration. Blocks identify subsystem roles; they do not reproduce the machine geometry, assembly sequence or fastening details. Request the approved model drawing for engineering use.
| Parameter | DHBT60-13-118 |
|---|---|
| Max. Theoretic delivery volume (m³/h) | 60 |
| Max. Theoretic delivery pressure (Mpa) | 12.5 |
| Max. Theoretic delivery height (m) | 180 |
| Max. Theoretic delivery distance (m) | 700 |
| Type of distribution valve | S valve |
| Hopper capacity (L) | 600 |
| Inner diameter of delivery pipe (mm) | Φ125 |
| Diesel engine power (Kw) | 118 |
| Max. Oil pressure of main system (MPa) | 32 |
| Max. Oil pressure of mixing system (MPa) | 14 |
| Dimension (length ×width ×height) (mm) | 6600×1930×2190 |
| Overall weight (Kg) | 5500 |
Published EPDAS specifications are a reference for equipment selection. Final specifications and included equipment are confirmed in the quotation. Maximum output, pressure, vertical height and horizontal distance are separate reference limits. They are not simultaneous guaranteed operating points; concrete properties and pipe layout affect performance.
Original EPDAS Technical Reference ↗| Selection reference | DHBT60-13-118 · This model | DHBT60-16-145 | DHBT80-13-145 |
|---|---|---|---|
| Max. Theoretic delivery volume (m³/h) | 60 | 60 | 80 |
| Max. Theoretic delivery pressure (Mpa) | 12.5 | 15.7 | 12.5 |
| Diesel engine power (Kw) | 118 | 145 | 145 |
| Overall weight (Kg) | 5500 | 6000 | 6000 |
| Dimension (length ×width ×height) (mm) | 6600×1930×2190 | 6600×1930×2190 | 6600×1930×2190 |
Assess DHBT60-13-118 where diesel operation is needed and the standard-pressure DHBT60 duty matches the project.
Concrete source, delivery rhythm and mix pumpability.
Vertical lift, horizontal sections, bends and delivery line diameter.
Positioning, access, cleaning arrangements and planned placing equipment.
Confirm core equipment, options, buyer-provided systems, transport modules, inspection documents and support responsibilities in the quotation.