YHZS25 Configuration
Two 6 m³ aggregate bins provide separate storage for a basic two-material aggregate arrangement.
YHZS25 places a JS500 mixer in a mobile plant arrangement with a published output of 15–20 m³/h. Its 4.0 m discharge height separates it from the low-discharge MCBP family.

Series rendering. Confirm YHZS25's appearance and included equipment in its proposal.
YHZS25 places a JS500 mixer and two 6 m³ aggregate bins in the YHZS mobile architecture. Published concrete output is 15–20 m³/h, with approximately 50 kW total power listed.
Compare it for smaller project supply needing an elevated receiving interface, particularly when the low-discharge MCBP configuration would call for a different transfer method.
Two 6 m³ aggregate bins provide separate storage for a basic two-material aggregate arrangement.
Approximately 50 kW total power is listed for planning the electrical supply.
Understand the role of each connection before building the equipment package.
INTERFACE 01 / Cement SiloThe source associates this configuration with 50-ton cement storage.
Include silo support and relocation logistics in the package discussion; verify what the quoted plant price includes.
INTERFACE 02 / Screw ConveyorThe listed Φ219 × 12000 mm powder screw requires coordinated silo and mixer-side endpoints.
Request the layout showing feed angle, service clearance and the cement hopper connection for this site.
INTERFACE 03 / Trailer Concrete PumpSeparate pumping may carry concrete beyond the mobile plant operating area.
Assess continuity at the pump hopper; a larger pump nameplate does not increase this plant’s mixing output.
INTERFACE 04 / Concrete Mixer PumpAn integrated mixer pump is an alternative when the job can use mixing and pumping at a single machine.
Decide between mobile central batching and integrated preparation before purchasing overlapping mixing equipment.
Options and alternative architectures are identified in each explanation. This is not a pre-approved matched package. Final connections, duty and supplied components require a model-specific technical review.
Review My Equipment CombinationSeparate the key systems to see what each contributes to the operation.
YHZS25 functional separation illustration. Blocks identify subsystem roles; they do not reproduce the machine geometry, assembly sequence or fastening details. Request the approved model drawing for engineering use.
| Parameter | YHZS25 |
|---|---|
| Concrete output capacity | 15~20m³/hr |
| Concrete output height (From the ground) | 4.0m |
| Central Mixer | JS500 |
| Aggregate bins | 2 bins × 6m³ |
| Aggregate feeding type | By belt |
| Aggregate weighing accuracy | ±2% |
| Water/Cement/Additive weighing accuracy | ±1% |
| Production control type | Manual by buttons + Auto by computer (PC) |
| Total power | ≈50kw |
| Screw conveyor | Φ219 × 12000mm |
| Cement hopper | 2 tons (≈1.5m³) |
| Cement silo | 50 tons |
Published EPDAS specifications are a reference for equipment selection. Final specifications and included equipment are confirmed in the quotation.
Original EPDAS Technical Reference ↗| Selection reference | YHZS25 · This model | YHZS35 | YHZS60 |
|---|---|---|---|
| Concrete output capacity | 15~20m³/hr | 20~30m³/hr | 40~50m³/hr |
| Central Mixer | JS500 | JS750 | JS1000 |
| Concrete output height (From the ground) | 4.0m | 4.0m | 4.0m |
| Total power | ≈50kw | ≈60kw | ≈80kw |
| Aggregate bins | 2 bins × 6m³ | 2 bins × 6m³ | 4 bins × 5m³ |
Compare YHZS25 for project-based concrete production where the receiving equipment needs a higher discharge point.
Two aggregate fractions, loading access and sufficient replenishment for the intended recipes.
Prepared supports and site utilities for the approximately 50 kW reference configuration.
Receiving opening and access compatible with the published 4.0 m discharge point.
Confirm core equipment, options, buyer-provided systems, transport modules, inspection documents and support responsibilities in the quotation.