168mm Configuration
Its inlet flange references use A 200, B 250 and C 280 mm for installation planning.
The Φ168 mm screw conveyor has a 24 t/h reference capacity in the source table. It is one of the conveyor sizes associated with the smaller 30 t and 50 t silo arrangements.

Series rendering. Confirm 168mm's appearance and included equipment in its proposal.
The Φ168 screw is a mechanical powder conveyor whose published capacity reference must be checked against length, inclination and material properties.
Compare it where smaller cement storage and the required feed interval justify this diameter class.
Its inlet flange references use A 200, B 250 and C 280 mm for installation planning.
The length-selection table covers this diameter across the listed 2–15 m range.
Understand the role of each connection before building the equipment package.
INTERFACE 01 / Cement SiloThe 30T and 50T tables include Φ168 references.
Check the actual silo outlet, gate and conveyor inlet together.
INTERFACE 02 / Stationary Concrete Batching PlantFeed rate should complete the plant's cement weighing within the intended batch sequence.
Compare actual duty with the 24 t/h table reference.
INTERFACE 03 / Mobile Concrete Batching PlantThe transportable plant location determines the screw's connection geometry.
Allow space to service the drive after each relocation.
INTERFACE 04 / Cement FeederA storage-filling device performs an upstream transfer role.
Distinguish that duty from the Φ168 discharge-to-scale route.
Options and alternative architectures are identified in each explanation. This is not a pre-approved matched package. Final connections, duty and supplied components require a model-specific technical review.
Review My Equipment CombinationSeparate the key systems to see what each contributes to the operation.
168mm functional separation illustration. Blocks identify subsystem roles; they do not reproduce the machine geometry, assembly sequence or fastening details. Request the approved model drawing for engineering use.
| Parameter | 168mm |
|---|---|
| Inlet flange A (mm) | 200 |
| Inlet flange B (mm) | 250 |
| Inlet flange C (mm) | 280 |
| Inlet H1, 0–20° (mm) | 400 |
| Inlet H1, >20–40° (mm) | 450 |
| Inlet H1, >40–50° (mm) | 500 |
| Outlet H2, 0–20° (mm) | 250 |
| Outlet H2, >20–40° (mm) | 300 |
| Outlet H2, >40–50° (mm) | 350 |
| Reference capacity | 24t/h |
Published EPDAS specifications are a reference for equipment selection. Final specifications and included equipment are confirmed in the quotation. Conveying capacity depends on material, inclination, length and feed conditions. Installation flange dimensions must be checked against the final drawing.
Original EPDAS Technical Reference ↗| Selection reference | 168mm · This model | 140mm | 219mm |
|---|---|---|---|
| Reference capacity | 24t/h | Not listed in this model reference | 40t/h |
| Inlet flange A (mm) | 200 | 200 | 300 |
| Inlet flange C (mm) | 280 | 280 | 380 |
| Inlet H1, 0–20° (mm) | 400 | 400 | 500 |
| Outlet H2, 0–20° (mm) | 250 | 250 | 300 |
Review Φ168 for a powder-feed duty that can be supported by the actual material, inclination and selected conveyor length.
Reference capacity: 24t/h
Confirm core equipment, options, buyer-provided systems, transport modules, inspection documents and support responsibilities in the quotation.