Tubular screw conveyors

Φ273 Mm Screw Conveyor

The Φ273 mm screw conveyor doubles the published reference capacity of the Φ219 option to 80 t/h. This is a table reference rather than a guaranteed rate at every angle.

EPDAS Screw Conveyor series reference for 273mm

Series rendering. Confirm 273mm's appearance and included equipment in its proposal.

WHAT IS 273mm?

An 80 T/h Powder-Conveying Reference

The Φ273 table reference increases powder-transfer capacity above Φ219 without establishing the same duty at every incline.

WHERE IT WORKS

Assess a higher cement-feed requirement where installation access and the actual storage-to-scale geometry support this diameter.

01

273mm Configuration

A 300/350/380 mm inlet flange reference lets the connection be assessed alongside its larger outer pipe.

02

273mm Selection Detail

The source includes length-selection entries from 2 m through 15 m for drive-configuration review.

273mm / CONNECT THE EQUIPMENT

The 273mm Equipment And Material Interfaces

Understand the role of each connection before building the equipment package.

  1. 01Compatible stored dry powder
  2. 02273mm inlet connection
  3. 03273mm mechanical screw conveying
  4. 04Receiving powder weighing system
Cement Silo series illustrationINTERFACE 01 / Cement Silo

Cement Silo / 273mm

Published silo associations extend through the 100T, 150T and 200T choices.

Confirm For 273mm

Compare the outlet drawings before selecting the inlet flange.

Review Cement Silo
Stationary Concrete Batching Plant series illustrationINTERFACE 02 / Stationary Concrete Batching Plant

Stationary Concrete Batching Plant / 273mm

A larger batching duty can call for greater powder feed per cycle.

Confirm For 273mm

Calculate cement mass and dosing time rather than selecting by plant output alone.

Review Stationary Concrete Batching Plant
Mobile Concrete Batching Plant series illustrationINTERFACE 03 / Mobile Concrete Batching Plant

Mobile Concrete Batching Plant / 273mm

A larger mobile production base may require different transport joints.

Confirm For 273mm

Agree disassembly and lifting access around the proposed screw.

Review Mobile Concrete Batching Plant
Cement Feeder series illustrationINTERFACE 04 / Cement Feeder

Cement Feeder / 273mm

Upstream replenishment must keep the silo supplied separately.

Confirm For 273mm

Do not confuse the 80 t/h conveyor reference with a bag-emptying or tanker-unloading rate.

Review Cement Feeder

Options and alternative architectures are identified in each explanation. This is not a pre-approved matched package. Final connections, duty and supplied components require a model-specific technical review.

Review My Equipment Combination
273mm / COMPONENT EXPLANATION

Exploded Functional Overview

Separate the key systems to see what each contributes to the operation.

01Inlet flange02Screw & enclosure03Drive assembly04Discharge flange

273mm functional separation illustration. Blocks identify subsystem roles; they do not reproduce the machine geometry, assembly sequence or fastening details. Request the approved model drawing for engineering use.

Request The 273mm Assembly Drawing
273mm / PUBLISHED CONFIGURATION

Technical Data For 273mm

Parameter273mm
Inlet flange A (mm)300
Inlet flange B (mm)350
Inlet flange C (mm)380
Inlet H1, 0–20° (mm)500
Inlet H1, >20–40° (mm)600
Inlet H1, >40–50° (mm)700
Outlet H2, 0–20° (mm)350
Outlet H2, >20–40° (mm)450
Outlet H2, >40–50° (mm)500
Reference capacity80t/h

Published EPDAS specifications are a reference for equipment selection. Final specifications and included equipment are confirmed in the quotation. Conveying capacity depends on material, inclination, length and feed conditions. Installation flange dimensions must be checked against the final drawing.

Original EPDAS Technical Reference ↗
A MODEL-SPECIFIC COMPARISON

Compare 273mm With Nearby Configurations

Selection reference273mm · This model219mm323mm
Reference capacity80t/h40t/h110t/h
Inlet flange A (mm)300300300
Inlet flange C (mm)380380380
Inlet H1, 0–20° (mm)500500550
Outlet H2, 0–20° (mm)350300400

Assess Φ273 for a larger powder-feed requirement with material density, incline and plant batching cycle considered together.

PREPARE THE 273mm PROPOSAL

Agree The Package And Site Interfaces

01

Reference capacity: 80t/h

Confirm core equipment, options, buyer-provided systems, transport modules, inspection documents and support responsibilities in the quotation.

Your Business Enquiry

* Required fields

EPDAS uses these details to respond to your equipment enquiry. For corrections or removal, contact info@epdas.com.

Discuss Your Project ↗