323mm Configuration
Its inlet-height references rise to 550, 700 and 800 mm across the three angle bands.
The Φ323 mm screw conveyor carries a published capacity reference of 110 t/h. It is associated with larger silo sizes in the EPDAS matching table.

Series rendering. Confirm 323mm's appearance and included equipment in its proposal.
The Φ323 screw provides a larger powder-transfer option with model-specific flange and inclination geometry.
Compare it for a substantial receiving requirement while reviewing the space needed around storage outlets and the weighing structure.
Its inlet-height references rise to 550, 700 and 800 mm across the three angle bands.
The listed outlet-height values of 400, 500 and 600 mm give model-specific geometry for checking the receiving hopper.
Understand the role of each connection before building the equipment package.
INTERFACE 01 / Cement SiloThe 200T and 300T silo references identify this larger diameter.
Verify the chosen vessel connection and support loads.
INTERFACE 02 / Stationary Concrete Batching PlantA higher-capacity conveyor should be evaluated against the actual batching cycle.
Allow suitable scale response and feed control in the proposed arrangement.
INTERFACE 03 / Foundation Free Concrete Batching PlantThe steel-base plant geometry establishes the receiving position.
Assess the screw span and connections across the approved modules.
INTERFACE 04 / Cement FeederLarge storage still needs a defined incoming cement route.
Agree replenishment equipment independently of the Φ323 outlet conveyor.
Options and alternative architectures are identified in each explanation. This is not a pre-approved matched package. Final connections, duty and supplied components require a model-specific technical review.
Review My Equipment CombinationSeparate the key systems to see what each contributes to the operation.
323mm functional separation illustration. Blocks identify subsystem roles; they do not reproduce the machine geometry, assembly sequence or fastening details. Request the approved model drawing for engineering use.
| Parameter | 323mm |
|---|---|
| Inlet flange A (mm) | 300 |
| Inlet flange B (mm) | 350 |
| Inlet flange C (mm) | 380 |
| Inlet H1, 0–20° (mm) | 550 |
| Inlet H1, >20–40° (mm) | 700 |
| Inlet H1, >40–50° (mm) | 800 |
| Outlet H2, 0–20° (mm) | 400 |
| Outlet H2, >20–40° (mm) | 500 |
| Outlet H2, >40–50° (mm) | 600 |
| Reference capacity | 110t/h |
Published EPDAS specifications are a reference for equipment selection. Final specifications and included equipment are confirmed in the quotation. Conveying capacity depends on material, inclination, length and feed conditions. Installation flange dimensions must be checked against the final drawing.
Original EPDAS Technical Reference ↗| Selection reference | 323mm · This model | 273mm | 407mm |
|---|---|---|---|
| Reference capacity | 110t/h | 80t/h | 170t/h |
| Inlet flange A (mm) | 300 | 300 | 470 |
| Inlet flange C (mm) | 380 | 380 | 530 |
| Inlet H1, 0–20° (mm) | 550 | 500 | 750 |
| Outlet H2, 0–20° (mm) | 400 | 350 | 450 |
Review Φ323 where the powder system needs a larger transfer class and sufficient connection space is available.
Reference capacity: 110t/h
Confirm core equipment, options, buyer-provided systems, transport modules, inspection documents and support responsibilities in the quotation.